Liquid Floc Size:  1L Liquid Floc clears cloudy water and increases water clarity by clustering fine particles together so they sink to the bottom of the pool, where they can be vacuumed up and removed.

USING LIQUID FLOC

Always read the safety directions first (refer packaging).

Liquid Floc should only be used if pool water remains cloudy after you have completed all 3-steps in the Poolpride system.  To work most effectively, it is necessary to use Poolpride pH Buffer to raise the level to at least 100ppm.

Directions

1. Add 100mls of Liquid Floc to every 9,000 litres of pool water (refer to pool calculator).
2. Premix in a bucket of water then pour around perimeter of pool.
3. Turn the pool pump onto 'filter' for 12 hours and backwash at regular intervals.
4. Vacuum sediment to drain off and top up pool water as required.

For best results, do not swim in the pool during this process to avoid disturbing sediment.

DOWNLOAD MSDS

 Liquid Floc MSDS

DOWNLOAD INFORMATION SHEET

 Liquid Floc INFO

OTHER INFORMATION

For more product information please contact our Customer Support Team.