pH Increase

Size:  2Kg

pH Increase is used to control the acidity of pool water and increase the pH level to the ideal range of 7.2 - 7.8.  If pH levels are too low, the pool water can irritate your eyes and skin, wrinkle vinyl liners and increase chlorine loss.

Poolpride-PH-Increase-2Kg 

USING pH INCREASE

Always read the safety directions first (refer to packaging).

  1. Determine the amount of pH Increase required to increase the pH to the ideal level of 7.2 - 7.8.  To increase the pH by 0.3 units use 100g of Poolpride pH Increase per 10,000 litres of pool water (refer to pool calculator).
  2. Pre-dissolve pH Increase in warm water and pour liquid into pool.
  3. Run filter for 1 hour per 4,000 litres of water.
  4. Test pH level again.

For weekly maintenance repeat as above.

DOWNLOAD MSDS

 PH Increase MSDS

DOWNLOAD INFORMATION SHEET

 pH Increase INFO

OTHER INFORMATION

For more product information please contact our Customer Support Team.


<< Back
Homepage | Pool Maintenance | Product Range | Common Problems | Pool Calculator
Pool Term Glossary | Where To Buy | Pool Safety | Material Safety Data Sheets | Games & Trivia
Contact Us