pH Decrease is used to control the alkalinity of pool water and decrease the pH level to the ideal range of 7.2 - 7.8. If pH levels are too high, the pool water can irritate your eyes, cloud water, form scales and decrease the effectiveness of chlorine.
USING pH DECREASE
Always read the safety directions first (refer to packaging).
- Determine the amount of pH Decrease required to lower the pH to the ideal level of 7.2 - 7.8. To lower the pH by 0.3 units use 100g of Poolpride pH Decrease per 10,000 litres of pool water (refer to pool calculator).
- Pre-dissolve pH Decrease in warm water and pour liquid into pool.
- Run filter for 1 hour per 4,000 litres of water.
- Test pH level again.
For weekly maintenance repeat as above.
PH Decrease MSDS
DOWNLOAD INFORMATION SHEET
pH Decrease INFO
For more product information please contact our Customer Support Team.